Skip to content

Supported Sensors

Click on one of the Captis devices below for more information about supported sensors.

Can't find the sensor you need? 

Send us a request for your sensor to be approved for use with mIoT's  Captis devices.

Captis PULSE

Captis MULTI

New Sensor Request

Captis PULSE

Captis MULTI

Technical Sensor Requirements

Digital Inputs

  • Passive Suitable for Reed SW + Open Collector + Dry Contact.
  • Maximum pulse frequency 500Hz
  • Sensor Minimum Open Resistance 1.25MΩ.
  • Sensor Maximum Closed Resistance 60KΩ.
  • Can be set to Pulse or Switch input type and configured for Normally Open and Normally Closed situations.

Digital Inputs

  • Passive Suitable for Reed SW + Open Collector + Dry Contact.
  • Maximum pulse frequency 500Hz
  • Sensor Minimum Open Resistance 1.25MΩ.
  • Sensor Maximum Closed Resistance 60KΩ.
  • Can be set to Pulse or Switch input type and configured for Normally Open and Normally Closed situations.

 

Digital Output

  • 48VDC max
  • 1.0 A Max
  • passive output (volt free switch)

 

5V Out (Sensor power) – The 5VDC is only active during Measurement. There is a configurable sensor boot time between power on and measurement taken. Max 5VDC current draw is 100mA
Analogue In –
0-2.5VDC 12 Bits (Resolution of ADC) connects to the output of the analogue sensor.

 

Serial

  • RS232/RS485) outputs,
  • Configurable baud rate and parity.
  • Provision for configuring up to 10 Modbus Slave registers to fetch.

 

One Wire – 2 channels for connecting one wire devices from the approved sensor list.

 

Expansion

  • SDI12 – Sensor Output Power 12VDC Max 200MA
  • Drexelbrook – Connects to DrexelBrook 7250

MAFSW12410

Float Switch

The Float Switch is a mechanically activated snap action contact switch. The current-sensing switch has been used as an indication for pump duty, eliminating the need for flow meters to be cut-in for temporary flow analysis. Applications for this unit include measuring tank, silo, sewer levels and preventative maintenance purposes

MADS18B20

Temperature Sensor

The 1-Wire Temperature Sensor is suitable for wide temperature range applications where submersion and harsh environments need to be monitored. The sensor is chemical resistant with a waterproof steel probe and cable. Applications include temperature sensing in equipment or machinery, inside of buildings and enclosures, HVAC and environmental situations.

MA7076XL

Ultra Sonic Sensor

The MA7076XL Ultra Sonic Sensor features a weather resistant housing and is suitable for short to long distance detection. A centimetre resolution with a range from 20cm to 1064cm for the nearest detectable target.

Sensor Submission

Please fill out the form below and we will get back to you as soon as we can.

  • Personal Details

  • Sensor Information

  • Use Case

  • Please provide a brief description of the scenario in which the sensor does/would get used.
Scroll To Top